Capture and reclaim
Reclaim tanks, pumps, free standing combination systems, mass air injection, and odor-control components support water reuse loops.
See reclaim packages
Application engineering
Published specifications, real operating constraints, and people who can help.
Review key operating details, understand where each system fits, and bring the right inputs into your first application conversation.
Engineering approach
System confidence starts with the right operating details.
Application guidance before selection.
Bring flow, pressure, water quality, and site conditions to Con-Serv’s application engineers before equipment is specified.
Operating conditions stay attached to the numbers.
RO capacity, pressure, hardness, iron, pH, and temperature limits are treated as application inputs—not blanket promises.
Every system is tested before shipment.
Each system receives a full quality test before it leaves the Con-Serv manufacturing floor.
Published specs
Useful numbers, with their operating context intact.
Published values retain the conditions that affect performance, so you know what to confirm with an application engineer.
| System | Useful buyer detail | Published notes |
|---|---|---|
| Line pressure RO with ERD | CS-PPRO 150, 300, and 450 models with 150 to 450 GPD capacity. | No electricity required, feed pressure 40 to 80 PSI, pH 2 to 11, and up to 80% drain wastewater reduction. |
| Hydrocyclonic particle separation | CS60PS listed with 60 GPM maximum output and VFD driven continuous duty motor. | Product literature states 90% or better efficiency for sand and solid matter separation. |
| Free Standing Combination systems | Series I, II, and III systems listed for reclaim and re-use equipment packages. | Series III notes dual self-cleaning stainless steel filter elements with alternating backwash. |
| K-BW systems | High-flow filtration system listed for up to 200 GPM of filtered water. | Product literature notes 25 micron absolute filtration. |
| Specialty and support systems | Ozone, Biozone, membrane cleaning, electro-deionization, softeners, media filters, pumps, and tanks. | Cut-sheet library supports product review before speaking with sales. |
System flow
Build the treatment path around the water.
Identify the stage your application needs, then bring the full operating picture into system selection.
Separate solids
Hydrocyclonic separation and filters help reduce sand and solids before downstream treatment.
Open separatorsPolish and pressurize
Media filters, carbon filters, softeners, booster pumps, and re-pressurization systems support water quality and delivery.
Review componentsFinish with RO
Reverse osmosis and spot free rinse systems provide a defined path for higher-purity water needs.
View RO detailsMaintain the loop
Cut sheets and replacement parts support practical maintenance after installation.
Open cut sheets
Application review
Bring flow, pressure, and water quality into the first conversation.
Call the toll-free number or send system requirements directly to Con-Serv sales.
- Toll free(800) 868-9888
- Emailsales@con-servwater.com
Good fit details
- FlowTarget GPM or GPD, peak demand, and storage needs.
- WaterHardness, iron, pH, temperature, and known contaminant profile.
- UseCar wash reclaim, industrial process water, spot free rinse, or specialty treatment.